RAMONSOLER K3687011 ALEXIA Thermostatic Built-in Mixer Set 2 Ways Chrome
Want it by calculating…? This date is an estimate and may be affected by factors beyond Bañoidea's control. We'll keep you updated on your order's progress at all times.
Order within …
Key Details
Brand: Ramón Soler
Collection: Alexia
Attachement: Empotrado
Type of Tap: Termostático
Color: Cromo
Color: Cromo
 |
Replacements Available |
ALEXIA thermostatic built-in 2-way faucet set by Ramon Soler with bracket, water inlet, minimalist cylindrical 1-position anti-limescale hand shower, 1.75m anti-twist metal hose Soleflex, and Ø250mm metal showerhead, Diamond Finish chrome, thermostop temperature limiter system, and patented anti-corrosion system.
- Finish: bright chrome.
- Thermostatic Cartridge ø34.
- 2-way distributor without shut-off.
- Flow at 3 bar: 12 l/min at hand shower outlet and 10 l/min at showerhead outlet.
- Anti-limescale nozzle system.
- Water outlet in the form of rain. Uniform water outlet through all the showerhead nozzles.
- Resistant to thermal and chemical shock, anti-legionella.
- 5-year warranty on faucets and 2 years on accessories.
- Operating pressure between 1-5 bar. Recommended 3 bar.
- Withstands static pressures equal to or less than 10 bar and water hammer shocks of 25 bar.
- Acoustic level at 3 bar: below 20 dB.
- Comfort features at the level of fidelity, sensitivity, and consistency in temperature selection.
- Recommended hot water temperature 55ºC. Maximum use temperature 65°C. Maximum 1h at 90°C.
- Minimum recommended installation with gas or electric heaters from 10 liters and a power of 18 Kw.
- Quick response to temperature variations. Maximum time 1 second. Thermostatic cartridge with Hot Block safety anti-scald system. Thermostop system locking the temperature at 38º. Chrome surface: 15 microns nickel thickness, 0.3 microns chrome. Thermostop Block system limiting the maximum hot water temperature. Tests: tightness, flow, mechanical behavior under pressure, mechanical resistance, dimensions, acoustics, and corrosion tests, carried out according to the requirements of European Standards EN 1111 and EN 248.
