GEBERIT 111.791.00.1 DUOFIX Frame with SIGMA Built-in Cistern 8 cm
Shipping cost calculated at checkout
Key Details
Brand: Geberit
Collection: Duofix
DUOFIX is the 8 cm SIGMA concealed cistern with frame for installation in brick walls or lightweight walls, with or without mortise. Manufactured by Geberit . Suitable for connection to a vertical drain and for any Wall Hung Toilet .
- Drain elbow mountable without tools in different depth positions.
- Vertically mountable drain elbow in front depth position.
- Elongated drain elbow, for connection to the floor.
- Acoustically insulated drain elbow fixing.
- Built-in cistern with front drive.
- Built-in cistern fully insulated against condensation.
- With the factory settings, immediate rinsing is possible.
- Assembly and maintenance in the built-in cistern without tools.
- Upper left supply connection.
- Pre-assembly box for humidity and dirt.
- Pre-assembly box that can be cut, suitable for flush pushbuttons.
- With guide tube for water supply to connect Geberit AquaClean bidet toilets.
- Fixing for electrical connection.
Applications
- For lightweight wall mounting.
- For installation on a full height wall or in front of a partial height wall.
- For full height wall installation.
- For suspended toilets with connection measurements according to EN 33:2011.
- For wall-hung toilets with an extended projection of up to 75 cm.
- For single, double volume or interruptible downloads.
- For screed heights of 0-30 cm.
Properties
- Manufacturing series 2016.
- Self-supporting frame with baked powder paint.
- Frame with ø 9 mm holes for fixing in construction with wooden panel.
- Frame suitable for ceramic toilets with reduced support surface (in case of pressure-resistant wall covering).
- Galvanized support Feet .
- Support Feet with continuous height adjustment.
- Support Feet with anti-slip properties.
- Support plate depth suitable for installation on UW 50 U profile and Geberit Duofix rail track.
Scope of delivery
- Rp 1/2" supply connection, MF compatible, with integrated angle wrench and thread.
- Pre-assembly box for registration.
- 2 wall anchors.
- Toilet hose set, ø 90 mm.
- 90° PVC drain elbow, ø 90 mm.
- PVC adapter sleeve, ø 90/110 mm.
- 2 protective caps.
- 2 M12 threaded rods.
- Fixing material.
Technical information
- Dynamic pressure 0.1-10 bar.
- Maximum water temperature 25 °C.
- Discharge volume, factory setting 6 and 3 l.
- Full discharge, adjustment range 4.5 / 6 / 7.5 l.
- Partial discharge, adjustment range 3-4 l.